Canon PowerShot D20 - Manual (Page 17)

Initial Preparations
17
The display language can be changed as needed.
Enter Playback mode.
z Press the 1 button.
Access the setting screen.
z Press and hold the m button, and then
immediately press the n button.
Set the display language.
z Press the opqr buttons to choose a
language, and then press the m button.
X Once the display language has been set, the
setting screen is no longer displayed.
Display Language
• The current time is displayed if you wait too long in step 2 after pressing the m
button before you press the n button. In this case, press the m button to
dismiss the time display and repeat step 2.
• You can also change the display language by pressing the n button and
choosing [Language ] on the 3 tab.
EC320_GS-EN_Web.book Page 17 Wednesday, February 15, 2012 2:53 PM
COP
Y