Canon imagePROGRAF iPF6400 - Manual (Page 551)

Roll Holder Set Roll Holder Set
Load a roll on the roll holder and then load the holder in the printer. The Roll Holder in the Roll Holder Set RH2-25 is for
use with both 2-inch and 3-inch paper cores. Use the correct attachment for the particular paper core. For borderless
printing on A1 (594 mm) or A2 (420 mm) rolls, attach the included Spacer for Borderless Printing to the Roll Holder.
(See "Loading Rolls on the Roll Holder.")
→P.531
• Roll Holder Set RH2-25
• Roll Holder (for 2- and 3-inch paper cores)
• Attachments
Using Rolls with a 2-inch Paper Core Using Rolls with a 3-inch Paper Core
Holder Stopper (for 2-inch paper cores) Holder Stopper (for 3-inch paper cores) 3-Inch Paper Core Attachment
• Borderless Printing on A1 or A2 Rolls
Spacer for Borderless Printing
Removing the Roll Feed Unit Removing the Roll Feed Unit
Important
• Always turn off the printer before removing the Roll Feed Unit. The printer may be damaged if you do not turn it off first.
1
Remove the roll from the Roll Feed Unit. (See "Removing the Roll from the Printer.") →P.538
iPF6400 Roll Holder Set
User's Guide
Handling and Use of Paper
Handling rolls
551