Canon imagePROGRAF iPF6400 - Manual (Page 653)

Setting Item Description, Instructions
Adjust
Printer Calibra-
tion Calibration Log When paper is set in the printer, the history of effective color
calibration for the set paper is displayed.
When paper is not set in the printer, the latest history among
common calibration or unique calibration is displayed.
Also, a hyphen (-) is displayed when there are no execution re-
sults.
(See "Color Calibration Using the Printer Sensor.")
→P.758
(See "Paper that can be used in Color Calibration.") →P.760
Use Adj. Value Choose Disabled > OK if you prefer not to apply the color cali-
bration adjustment value in print jobs. However, printer driver
settings are given priority.
Choose Enabled > OK to apply the color calibration adjust-
ment value in print jobs. However, printer driver settings are
given priority.
Set Exec. Guide If you select On, a message is displayed on the control panel
at the timing recommended for executing color calibration.
Return Defaults Clear the color calibration adjustment value and the execution
log.
Mainte-
nance Head Cleaning Clean the Printhead. (See "Cleaning the Printhead.")
→P.846
Choose Head Cleaning A if printing is faint, oddly colored, or
contains foreign substances.
Choose Head Cleaning B if no ink is printed at all, or if printing
is not improved by Head Cleaning A.
Nozzle Check Print a test pattern to check the nozzles.
Replace P.head Execute when replacing the Printhead. Follow the instructions
displayed to complete the required procedure. (See "Replacing
the Printhead.")
→P.847
Not displayed during a warning message that the remaining
Maintenance Cartridge capacity is low.
Repl. maint cart Execute when replacing the Maintenance Cartridge. Follow the
instructions displayed to complete the required procedure.
(See "Replacing the Maintenance Cartridge.")
→P.854
Head In-
fo Printhead L Indicates information about the printhead.
Printhead R
Clean Platen Move the Carriage in preparation for cleaning the Platen.
Interface
Setup EOP Timer Specify the timeout period before cancellation of print jobs that
cannot be received by the printer.
TCP/IP IPv4 IPv4 Mode Choose whether the printer IP address is configured automati-
cally or a static IP address is entered manually.
Protocol DHCP Specify the protocol used to configure the IP address automati-
cally.
BOOTP
RARP
IPv4 Set-
tings IP Address Specify the printer network information when using a static IP
address.
Enter the IP address assigned to the printer, as well as the net-
work subnet mask and default gateway.
The value that was automatically configured is displayed if you
have set IPv4 Mode to Automatic.
Subnet Mask
Default G/W
DNS Set-
tings DNS Dync update Specify whether DNS server registration is updated automati-
cally.
iPF6400 Menu Settings
User's Guide
Control Panel
Printer Menu
653