Canon PowerShot ELPH 130 IS - Manual (Page 116)

116
1
2
3
4
5
6
7
8
9
Cover
Preliminary Notes and
Legal Information
Contents:
Basic Operations
Advanced Guide
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
Playback Mode
Cover
Advanced Guide
8
Accessories
Still Images Movies
Powering the Camera with Household Power
Powering the camera with AC Adapter Kit ACK-DC90 (sold separately)
eliminates the need to monitor the remaining battery level.
1 Make sure the camera is off.
2 Open the cover.
z z Follow step 2 in “Inserting the Battery
and Memory Card” ( = 12) to open
the memory card/battery cover, and then
open the coupler cable port cover as
shown.
3 Insert the coupler.
z z Insert the coupler facing the direction
shown, just as you would a battery
(following step 3 in “Inserting the Battery
and Memory Card” ( = 12)).
z z Make sure the coupler cable passes
through the port.
Terminals
Coupler Cable Port
4 Close the cover.
z z Lower the cover ( ) and hold it down as
you slide it, until it clicks into the closed
position ( ).
5 Connect the power cord.
z z Insert the adapter plug into the end of the
coupler cable.
z z Insert one end of the power cord into the
compact power adapter, and then plug
the other end into a power outlet.
z z Turn the camera on and use it as desired.
z z When finished, turn the camera off and
unplug the power cord from the outlet.
• Do not disconnect the adapter or unplug the power cord while
the camera is still on. This may erase your shots or damage the
camera.
• Do not attach the adapter or adapter cord to other objects. Doing so
could result in malfunction or damage to the product.
COP
Y