Audiovox ACC-52 - Manual (Page 13)

CONTROLS
LCD Display
Play/Pause ( / II)
Power Off Switch (OFF)
Disc Select ( + - )
Track Select ( )
Track Search ( )
Track/Disc Shuffle (SHFL)
Track/Disc Repeat (RPT)
Track/Disc Scan (SCN)
Reset Button
PREPARING FOR OPERATION
1. Load CD magazine
bm
and insert into changer as
described on page 16.
2. Turn on your car ignition and your car stereo
bn
and
select “FM” band
bo
.
3. Tune to 89.1 on the FM band
bp
unless you set the
selection switch on the FM module to 88.7; then
tune to 88.7 on the FM band.
Note: You may find that it will be easier to use
one of your presets specifically for CD
operation.
4. Depress the “RESET” button
bq
on the remote
control.
Note: This is only required the First Time you use
the Changer.
5. Turn on the CD player by pressing the Play/Pause
button br
. The CD panel
bs
will illuminate and disc
number 1 will begin play.
6. Adjust your car radio’s volume, balance and tone
controls for desired sound.
7. When the last track on disc 1 has played, the unit
will automatically advance to the next disc in
sequence and begin playing. This will continue
until all discs have been played at which time the
unit will begin playing disc number 1 again.
13
OPERATING INSTRUCTIONS
Upon inserting a loaded CD magazine into the changer, the unit will begin automatically checking the magazine for the number
of discs loaded and their locations. This will occur even if the vehicle’s ignition is turned off. This process will take approximately
45 seconds. During this time, the remote control function will be inoperative.
10
2
1
3
5
4
6
7
8
9
DISC SELECT
POWER
INTRO SCAN
SHUFFLE
9
10
7
1
4
2
8
3
5 6
INTRO SCAN
SHUFFLE
SHFL
REPEAT
OFF
12
13
14
11
16
15
FM 89.1
17