4 residual heat indicator, Daily use, 1 activating and deactivating – Electrolux EHG6341FOK User Manual

Page 25: 2 automatic switch off, 3 the heat setting, 4 activating and deactivating the outer rings, 5 automatic heat up, 6 power function

Advertising
background image

3.4 Residual heat indicator

WARNING!

There is a risk of burns

from residual heat.

The induction cooking zones make the

heat necessary for cooking process

directly in the bottom of the cookware.

The glass ceramic is heated by the heat of

the cookware.

4. DAILY USE

WARNING!

Refer to Safety chapters.

4.1 Activating and deactivating

Touch for 1 second to activate or

deactivate the hob.

4.2 Automatic Switch Off

The function deactivates the hob

automatically if:
• All cooking zones are deactivated.

• You do not set the heat setting after

you activate the hob.

• You spill something or put something

on the control panel for more than 10

seconds (a pan, a cloth, etc.). An

acoustic signal sounds and the hob

deactivates. Remove the object or

clean the control panel.

• The hob gets too hot (e.g. when, a

saucepan boils dry). Let the cooking

zone cool down before you use the

hob again.

• You use incorrect cookware. The

symbol comes on and the cooking

zone deactivates automatically after 2

minutes.

• You do not deactivate a cooking zone

or change the heat setting. After some
time comes on and the hob

deactivates. See below.

The relation between heat setting and

times of the function:

,

1 - 2— 6 hours

3 - 4 — 5 hours

5 — 4 hours

6 - 9 — 1.5 hours

4.3 The heat setting

Touch to increase the heat setting.
Touch to decrease the heat setting.
Touch and at the same time to

deactivate the cooking zone.

4.4 Activating and deactivating

the outer rings

You can adjust the surface you cook to

the dimension of the cookware.

Use sensor field:
To activate the outer ring: touch the

sensor field. The indicator comes on.
To deactivate the outer ring: touch the

sensor field until the indicator goes out.

4.5 Automatic Heat Up

If you activate this function you can get a

necessary heat setting in a shorter time.

The function sets the highest heat setting

for some time and then decreases to the

correct heat setting.

To activate the function the

cooking zone must be cold.

To activate the function for a cooking
zone: touch ( comes on). Touch
until comes on. Immediately touch

until the correct heat setting comes on.
After 3 seconds comes on.

To deactivate the function: touch .

4.6 Power function

This function makes more power available

to the induction cooking zones. The

function can be activated for the induction

cooking zone only for a limited period of

time. After this time the induction cooking

ENGLISH

25

Advertising