ACTiSYS ACT IR2000UL - Manual (Page 18)

The Infrared Wireless Expert
ACT-IR2000UL
User’s Manual
© Copyright 2002-2007 ACTiSYS Corp. Page 18 of 20 Jul 6, 2007
Version. 1.6
11 PRECAUTIONS
To ensure trouble-free operation, please observe the following precautions:
Optical communications are easily affected by external light sources, weak batteries, transfer
distance, transfer angle, etc. Any of these conditions may cause a data transfer failure,
incomplete, missing or incorrect data. Make sure that the wireless interface is away from direct
sunlight and other strong light source.
z Do not terminate arbitrarily during file transfer process between DUT and computers
until finished. Otherwise DUT internal data integrity may be damaged, which is due
to the violation of DUT’s.
z Do not expose the unit to moisture, as this will damage the internal circuitry.
z Do not expose the unit to extreme temperatures. It should not be placed in direct sunlight or in a
closed vehicle, neither should it be placed near heaters nor other heat sources.
z Do not store the unit in a humid or dusty place.
z Use a soft, dry cloth to clean the unit. Do not use a wet cloth or any solvent.
z Do not drop the unit or handle the unit carelessly.
CAUTION:
z Never touch the pins of computer connection terminal. An Electro Static Discharge can damage the internal
circuits. If this device requires any servicing, use only an ACTiSYS service dealer, an ACTiSYS approved
service facility, or an ACTiSYS repair service.
z When exchanging data with host computer, be sure the appropriate serial communication port is available
and is not in conflict with other peripheral device or software.