Forensic Computers Tableau T35i SATA/IDE Bridge User Manual
Page 12
11
READ-WRITE mode (even though it is not), and
Windows 2000 will successfully mount NTFS volumes.
Windows
ME/98se
ON
OFF Windows ME/98se may not recognize that a bridge is
READ-ONLY and may attempt to write to the bridge
anyway. If this happens, Windows ME/98se will generate a
"blue screen" error. The recommended settings to the left
eliminate the "blue screen" error.
NOTE: Some forensic users prefer to see the Windows
"blue screen" error if a write is attempted. Users with this
preferences should use the recommended settings for
Windows XP instead.
Other
OFF
OFF Most other modern operating systems handle READ-
ONLY forensic bridges correctly, so the default OFF
settings are best for users of these operating systems.
IMPORTANT: As long as the Write Block LED is illuminated, the Tableau bridge will never permit
writes or other modifications to the subject hard disk. Switches 2 and 3 only affect the way the
bridge appears to behave from the perspective of the host computer.
NOTE: Switches 2 and 3 are ignored when the Tableau bridge is in READ-WRITE mode (i.e.,
when the Write Block LED is off).