Forensic Computers Tableau T35i SATA/IDE Bridge - Manual (Page 5)

4
Tableau T35i SATA/IDE Bridge
The T335 is designed to be mounted in a 5.25" half-height drive bay on the
front of a forensic workstation or tower. The T335 is specifically designed to
work in conjunction with SATA and IDE removable drive trays, which
should be mounted in close proximity to the T335 in the host computer.
(PN: T335)
Tableau IDE Ribbon Cable
The TC6-8 IDE ribbon cable is a high-quality, 80-conductor IDE cable with
standard high-density 40-pin IDE connectors at each end. There are pull tabs
at each end to make the cable more rugged. (PN: TC6-8)
8” Red SATA Flat Cable
The eight inch SATA cable is a standard SATA signal cable for use with the
Tableau T3u SATA Bridge or the T35e SATA/IDE Bridge. (PN: TC3-8)
Female to Female Molex ® Power Cables (6” or 12”)
The TC2-8 or female to female Molex ® power cable is designed to conduct
power from a Tableau T3u, T35e, T4, or T5 forensic bridge to a subject hard
drive. (PN: TC2-8)
SATA 15-pin to Female Molex ® Power Cable
The TC5-8 or SATA 15-pin to female Molex ® cable is an eight inch power cable with a
4-pin female Molex ® connector on one end (white) and a 15-pin SATA style
power connector at the other end (black). The TC5-8 is intended to conduct
power from a Tableau T3u or a Tableau T35e to a subject SATA hard drive.
(PN: TC5-8)
Tableau 1.8 IDE Notebook Adapter
The Tableau 1.8 IDE Hard Disk adapter allows the user to connect to a 1.8 IDE
Notebook hard drive to a 40-pin IDE cable. The Tableau 1.8 IDE Hard Disk
adapter also has a 50-pin male laptop drive connector and a 4-pin standard Molex
®
power connection. (PN: TDA5-18)