1 adjusting the water softener, How to adjust the level of the water softener – Electrolux ESL6361LO User Manual
Page 8
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Processing residues can stay in the
appliance. Start a programme to re-
move them. Do not use detergent and
do not load the baskets.
6.1 Adjusting the water softener
Water hardness
Water softener
adjustment
German
degrees
(°dH)
French
degrees
(°fH)
mmol/l
Clarke
degrees
Level
47 - 50
84 - 90
8.4. - 9.0
58 - 63
10
43 - 46
76 - 83
7.6 - 8.3
53 - 57
9
37 - 42
65 - 75
6.5 - 7.5
46 - 52
8
29 - 36
51 - 64
5.1 - 6.4
36 - 45
7
23 - 28
40 - 50
4.0 - 5.0
28 - 35
6
19 - 22
33 - 39
3.3 - 3.9
23 - 27
5
1)
15 - 18
26 - 32
2.6 - 3.2
18 - 22
4
11 - 14
19 - 25
1.9 - 2.5
13 - 17
3
4 - 10
7 - 18
0.7 - 1.8
5 - 12
2
< 4
< 7
< 0.7
< 5
1
2)
1) Factory position.
2) Do not use salt at this level.
How to adjust the level of the
water softener
1. Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode, refer to “Set-
ting and starting a programme”.
2. Press and hold, at the same time
and
until the
,
and
indicators start
to flash.
3.
Press button
.
• The indicators of buttons
and
go off.
•
The indicator of button
contin-
ues to flash.
• The display shows the current set-
ting of the water softener, e.g.
= level 5.
4.
Press button
again and again to
change the setting.
5. Press the on/off button to deactivate
the appliance and to confirm the set-
ting.
8
www.electrolux.com