Electrolux EHO8840FOG - Manual (Page 11)

To activate the function when the
cooking zones operate: touch three
times to get the Minute Minder .
To stop the sound: touch .
The function has no effect on
the operation of the cooking
zones.
4.11 STOP+GO
This function sets all cooking zones that
operate to the lowest heat setting.
When the function operates, you cannot
change the heat setting.
The function does not stop the timer
functions.
To activate the function: touch .
comes on.
To deactivate the function: touch .
The previous heat setting comes on.
4.12 Lock
You can lock the control panel while
cooking zones operate. It prevents an
accidental change of the heat setting.
Set the heat setting first.
To activate the function: touch again
and again until you see the Lock function
display. Touch
to confirm. comes
on. The Timer stays on.
To deactivate the function: touch .
The previous heat setting comes on.
When you deactivate the
hob, you also deactivate this
function.
4.13 The Child Safety Device
This function prevents an accidental
operation of the hob.
To activate the function: deactivate the
hob with . When the hob is shutting
down touch . The display shows a
message, that the function operates.
To deactivate the function: activate the
hob with . Touch and then
.
To override the function for only one
cooking time: activate the hob with .
Touch
and at the same time. Set
the heat setting in 10 seconds. You
can operate the hob. When you deactivate
the hob with the function operates
again.
4.14 Deactivation and activation
of the sounds
Activate the hob. Touch and then set
the sound menu with arrows. Touch
to confirm . Set the option with the
arrows. Touch
to confirm.
When the function operates you can hear
the sounds only when:
• you touch
• Minute Minder comes down
• Power-off timer comes down
• you put something on the control
panel.
4.15 Power management
function
• Cooking zones are grouped according
to the location and number of the
phases in the hob. See the illustration.
• Each phase has a maximum electricity
loading of 3700 W.
• The function divides the power
between cooking zones connected to
the same phase.
• The function activates when the total
electricity loading of the cooking zones
connected to a single phase exceeds
3700 W.
• The function decreases the power to
the other cooking zones connected to
the same phase.
• The heat setting display of the reduced
zones changes between two levels.
ENGLISH 11