Electrolux EHO8840FOG - Manual (Page 9)

4.3 Selecting language
To change the language, start the hob
with and then touch
. Set the
language menu with arrows. Touch to
confirm. The display shows the list of
languages. Touch
or to set the
language. Touch to confirm.
4.4 The heat setting
To set or change the heat setting:
Touch the control bar at the correct heat
setting or move your finger along the
control bar until you reach the correct heat
setting.
4.5 Using the cooking zones
Put the cookware on the cross / square
which is on the surface that you cook.
Cover the cross / square fully. Induction
cooking zones adapt to the dimension of
the bottom of the cookware automatically.
You can cook with the large cookware on
two cooking zones at the same time.
4.6 Connect Function
Use this function with the
Infinite Plancha
1
accessory.
This function connects two left side
cooking zones under the accessory and
they operate as one.
First set the heat setting for one of the left
side cooking zones.
To activate the function: touch . To
set or change the heat setting touch one
of the left control sensors.
To deactivate the function: touch .
The cooking zones operate independently.
4.7 Automatic Heat Up
If you activate this function you can get a
necessary heat setting in a shorter time.
The function sets the highest heat setting
for some time and then decreases to the
correct heat setting.
To activate the function the
cooking zone must be cold.
To activate the function for a cooking
zone: touch . Immediately touch the
correct heat setting. A comes on.
To deactivate the function: change the
heat setting.
4.8 Power Boost
This function makes more power available
to the induction cooking zones. The
function can be activated for the induction
cooking zone only for a limited period of
time. After this time the induction cooking
zone automatically sets back to the
highest heat setting.
Refer to “Technical
information” chapter.
To activate the function for a cooking
zone: touch . P in the ring comes on.
As the zone gets more hot, the colour of
the ring changes.
To deactivate the function: change the
heat setting.
4.9 Timer
There are 3 functions: Automatic Counter,
Power-off timer and Minute Minder.
Automatic Counter
You can use this function to monitor how
long the cooking zone operates. The
1 The accessory is not supplied with the appliance. For more information, please contact
your local supplier.
ENGLISH 9