Electrolux EHH6332FOK - Manual (Page 7)

DAILY USE
ACTIVATION AND
DEACTIVATION
Touch for 1 second to activate or deac-
tivate the appliance.
AUTOMATIC SWITCH OFF
The function deactivates the appliance
automatically if:
• All cooking zones are deactivated (
).
• You do not set the heat setting after you
activate the appliance.
• You spill something or put something on
the control panel for more than 10 sec-
onds, (a pan, a cloth, etc.). An acoustic
signal sounds some time and the appli-
ance deactivates. Remove the object or
clean the control panel.
• The appliance becomes too hot (e.g.
when, a saucepan boils dry). Before you
use the appliance again, the cooking
zone must be cool.
• You use incorrect cookware. The symbol
comes on and the cooking zone de-
activates automatically after 2 minutes.
• You do not deactivate a cooking zone or
change the heat setting. After some time
comes on and the appliance deacti-
vates. See below.
• The relation between heat setting and
times of the Automatic Switch Off func-
tion:
•
, - — 6 hours
• - — 5 hours
•
— 4 hours
• - — 1.5 hours
THE HEAT SETTING
Touch to increase the heat setting.
Touch to decrease the heat setting. The
display shows the heat setting. Touch
and
at the same time to deactivate the
cooking zone.
AUTOMATIC HEAT UP
You can get a necessary heat setting in a
shorter time if you activate the Automatic
Heat Up function. This function sets the
highest heat setting for some time (see the
diagram), and then decreases to the nec-
essary heat setting.
To start the Automatic Heat Up function for
a cooking zone:
1.
Touch . The symbol comes on
in the display.
2.
Immediately touch . The symbol
comes on in the display.
3.
Immediately touch again and again
until the necessary heat setting comes
on. After 3 seconds
comes on in
the display.
To stop the function, touch .
1
2
3
4
5
6
7
8
9
10
11
0
1 2 3 4 5 6 7 8 9
POWER FUNCTION
The Power function makes more power
available to the induction cooking zones.
The Power function is activated for 10 mi-
nutes at most. After, that the induction
cooking zone automatically sets back to
highest heat setting. To activate, touch
,
comes on. To deactivate, touch or
.
POWER FUNCTION OF THE
DOUBLE RING COOKING ZONE
Power function of the inner ring starts when
the appliance senses the cookware with a
smaller diameter than the inner ring. Power
function of the outer ring starts when the
appliance senses the cookware with a larg-
er diameter than the inner ring.
ENGLISH 7