Electrolux EHH6332FOK - Manual (Page 8)

POWER MANAGEMENT
The power management divides the power
between two cooking zones in a pair (see
the illustration). The power function increa-
ses the power to the maximum level for
one cooking zone in the pair. The power in
the second cooking zone automatically de-
creases. The heat setting display for the re-
duced zone changes between two levels.
TIMER
Use the Count Down Timer to set how long
the cooking zone operates for only this one
time.
Set the Timer after the selection of the
cooking zone.
You can set the heat setting before or after
you set the timer.
• To set the cooking zone:touch
again and again until the indicator of a
necessary cooking zone comes on.
• To activate or change the Timer:
touch or of the timer to set the
time (
00
-
99
minutes). When the indi-
cator of the cooking zone starts to flash
slow, the time counts down.
• To deactivate the Timer: set the cook-
ing zone with and touch to deacti-
vate the Timer. The remaining time
counts back to
00
. The indicator of the
cooking zone goes out.
• To see the remaining time: set the
cooking zone with . The indicator of
the cooking zone starts to flash quickly.
The display shows the remaining time.
When the time comes to an end, the sound
operates and
00
flashes. The cooking
zone deactivates.
• To stop the sound: touch
You can use the Timer as a minute mind-
er while the cooking zones do not operate.
Touch
. Touch or to set the time.
When the time comes to an end, the sound
operates and
00
flashes
• To stop the sound: touch
STOP+GO
The function sets all cooking zones that
operate to the lowest heat setting ( ).
When operates, you cannot change the
heat setting.
The
function does not stop the timer
function.
• To activate this function touch
. The
symbol comes on.
• To deactivate this function touch
.
The heat setting that you set before
comes on.
LOCK
When the cooking zones operate, you can
lock the control panel, but not
. It pre-
vents an accidental change of the heat set-
ting.
First set the heat setting.
To start this function touch
. The sym-
bol comes on for 4 seconds.
The Timer stays on.
To stop this function touch
. The heat
setting that you set before comes on.
When you stop the appliance, you also
stop this function.
THE CHILD SAFETY DEVICE
This function prevents an accidental opera-
tion of the appliance.
To activate the child safety device
• Activate the appliance with
. Do not
set the heat settings.
• Touch for 4 seconds. The symbol
comes on.
• Deactivate the appliance with .
To deactivate the child safety device
• Activate the appliance with
. Do not
set the heat settings. Touch for 4
seconds. The symbol comes on.
• Deactivate the appliance with .
8 www.electrolux.com