Electrolux EHL7640FOK - Manual (Page 24)

sensor field function
4 To activate the Bridge function.
5
A control bar To set a heat setting.
6 / To increase or decrease the time.
7 To set a cooking zone.
8 The timer display To show the time in minutes.
9 Timer indicators of cooking
zones To show for which cooking zone you set
the time.
10 To lock/unlock the control panel.
11 To activate and deactivate the STOP+GO
function.
3.2 Heat setting displays
Display Description
The cooking zone is deactivated.
- The cooking zone operates.
The function operates.
The Automatic Heat Up function operates.
Power function operates.
+ digit There is a malfunction.
/ / OptiHeat Control (3 step Residual heat indicator) : contin-
ue cook / stay warm / residual heat.
Lock / The Child Safety Device operates.
Not correct cookware or too small or no cookware on the
cooking zone.
The Automatic Switch Off function operates.
3.3 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
\ \ The risk of burns
from residual heat!
OptiHeat Control shows the level of the
residual heat. The induction cooking
zones make the heat necessary for cook-
ing directly in the bottom of the cookware.
The glass ceramic is hot from the heat of
the cookware.
4. DAILY USE
4.1 Activation and deactivation
Touch for 1 second to activate or de-
activate the appliance.
24 www.electrolux.com