Electrolux EHS3920HOX - Manual (Page 6)

• Cut off the mains cable and discard it.
3. PRODUCT DESCRIPTION
3.1 Cooking surface layout
180 mm
145 mm
1
2
3
4 5
1 Cooking zone
2 Cooking zone
3 Power indicator
4 Control knobs
5 Timer knob
3.2 Control knob
Symbol Function
0 Off position
1 - 6 Heat settings
3.3 Residual heat
WARNING!
There is a risk of burns from
residual heat.
4. DAILY USE
WARNING!
Refer to Safety chapters.
4.1 Before first use
Put cookware containing water on each
cooking zone, set the maximum position
and operate the hob for 10 min. This is to
burn off the residue in the appliance. After
that, operate the hob at minimum position
for 20 min. During this period, an odour
and smoke can occur. This is normal.
Make sure that the airflow is sufficient.
4.2 Using the rapid hot plate
A red dot in the middle of the plate shows
a rapid hot plate. A rapid hot plate heats
up faster than usual plates. The red dots
are painted on the plates. They can
deteriorate during use and even disappear
completely after a period of time. It does
not have an effect on the performance of
the hob.
4.3 The heat setting
To set or change the heat setting turn the
knob to the correct heat setting. To
deactivate turn the knob to off position.
Power indicator activates when one or
more cooking zones are activated. When
you deactivate the cooking zones the
indicator deactivates.
4.4 Timer
Count Down Timer
You can use this function to set how long
the hob operates.
First set the heat setting.
To activate the function: turn the knob
for the timer as far as possible. Then turn
it to the correct time period value.
When the time comes to an
end, the sound operates and
the hob deactivates.
www.electrolux.com 6