Bosch SGE63E06UC - Manual (Page 10)

10
The dishwasher can be secured into its enclosure in two
ways:
Top Mount 1. is used for countertops made of wood or
other materials that can easily drilled. Orient the mount-
ing brackets as shown in Figure 14, and position the two
small tabs on the mounting brackets over the two slots
on the dishwasher’s front corners. Push the mounting
brackets down irmly to insert the tabs into the slots.
Side Mount 1. is used for countertops made of marble,
granite, or other very hard materials that cannot be easily
drilled. Bend the mounting brackets along the small
holes and in the same direction as the two small tabs.
Orient the mounting brackets as shown in Figure 15, and
position the two small tabs on the mounting brackets
over the two slots on the dishwasher’s front corners.
Push the mounting brackets down irmly to insert the
tabs into the slots.
For a large port, use the drain hose as it is.
For a small port, insert the rubber drain hose adaptor 1.
into the drain hose end.
Obtain the Rubber Drain Hose Adaptor spring clamp from
2.
the Dishwasher Installation Kit (do not substitute).
Insert the dishwasher drain hose into the
3. end of the
drain hose (see Figure 12). Be sure to fully insert the
drain hose.
Use the clamp provided to attach the Rubber Drain Hose
4.
Adaptor to the house plumbing
Figure 13
Figure 12
Before installing the supplied countertop mounting
brackets, decide which method of securing the
dishwasher into its enclosure will be used. Once the
mounting brackets are installed on the dishwasher,
removing them is difficult and will damage the
mounting brackets and the dishwasher.
Figure 15
Screw
Clamp
Installation of Mounting Brackets Installation of Rubber Drain Hose Adaptor
Top Mount
Figure 14
Side Mount