Something not working, Problem, Possible cause – Zanussi FL 726 CN User Manual

Page 18: The machine does not start up, The machine does not fill, The machine does not empty and/or does not spin, There is water on the floor, Unsatisfactory washing results, The machine fills then empties immediately

Advertising
background image

18

SOMETHING NOT WORKING

n

Problem

n

Possible cause

n

The machine does not start up:

n

Check that the door is firmly closed.

n

Check that the machine is plugged in and
that there is power at the socket.

n

Check that the main fuse has not blown.

n

Check that the programme selector dial is
positioned correctly and pulled out.

n

The machine does not fill:

n

Check that the water tap is open.

n

Check that water is coming out of the tap.

n

Check that the inlet hose is not squashed or
kinked.

n

Check that the filter in the inlet hose is not
blocked.

n

Check that the door is closed.

n

The machine does not empty
and/or does not spin:

n

Check that the drain hose is not squashed or
kinked.

n

The anticrease

option has been selected.

n

The laundry is not evenly distributed in the
drum.

n

There is water on the floor:

n

Too much detergent or unsuitable detergent
(creates too much foam) has been used.

n

Check whether there are any leaks from one
of the inlet hose fittings. It is not always easy
to see this as the water runs down the hose;
check to see if it is damp.

n

Check that the drain hose is not damaged.

n

Unsatisfactory washing results:

n

Too little detergent or unsuitable detergent
has been used.

n

Stubborn stains have not been treated prior
to washing.

n

The correct temperature or programme was
not selected.

n

The machine fills then empties
immediately:

n

The end of the drain hose is too low. Refer to
relevant paragraph in “water drainage”
section.

Problems which you can resolve yourself

Advertising
This manual is related to the following products: