Control panel, 1 spin speed reduction button, 2 half-load button – Zanussi FL 726 CN User Manual

Page 8: 3 anti-crease button, 4 door opening button, 5 temperature selector dial, 6 operating pilot light, 7 programme selector dial

Advertising
background image

8

USE

Control panel

D
F
G

M
N
P

F L

7 2 6 C N

40º- 95º
30º- 60º
30º- 40º

30º- 60º
30º- 40º
30º- 40º

A

B
B
C

H

J
K
L

1 2 3

4

5

6

7

1 Spin speed reduction button

By depressing this button the spin speed is
reduced from 700 to 500 rpm in the cotton
programmes and from 550 to 400 rpm in the
gentle programmes.

2 Half-load button

By depressing this button when washing a small
load of cottons or linens (max 1.5 kg) you will
obtain a reduction of the water consumption on
the rinse cycle.
The machine will carry out 3 rinses instead of 4.

3 Anti-crease button

By depressing this button on programmes H-J-
K-L-M
the water of the last rinse is not emptied
out, to prevent the fabrics from creasing. To
drain the water, depress this button again (the
laundry will be gently spun) or select drain
programme “P”.

4 Door opening button

Depress it to open the door.

5 Temperature selector dial

Turn this dial to select the washing temperature.
Position

= cold wash.

6 Operating pilot light

This light is on whilst the machine is operating
and goes out at the end of the programme.

7 Programme selector dial

To select the required programme, turn this dial
clockwise until the programme letter is exactly
opposite the pointer.
To start the programme, pull the dial outwards,
to switch off the machine, push the dial inwards.

Advertising
This manual is related to the following products: