Water Inc BG 1000 - Manual (Page 3)

BG-12000 BG-3000 BG-1000
Filter Cartridge Filter Head/Shroud
13 1/4” 15 1/2”
To use with all available cartridges, the cartridge must be
mounted with at least the amount of space indicated.
16 1/4”
4 7/16" 4 7/16" 4 7/16"
3 1/4" 5 1/2" 2 1/2"
Parts and Materials Included:
• Filter Cartridge
• Filter Head Assembly
• Filter Head Shroud
• (2) Quick Connect Fittings
• (1) 3/8” IPS x 1/4” Quick Connect
Riser Adapter
• (2) Phillips Head Mounting Screws
• (2) Mounting Screw Star Washers
• (1) Quick Connect 1/4” Ball Valve
• 7’ of 1/4” Plastic Tubing
• Faucet Adapter 3/8” x 1/4” Quick
Connect Fitting
• Filter Vent Tube
(Connected to Filter Head Assembly)
• Water Filter Replacement Indicator &
Instructions
• Performance Indicator Device (PID)
[BG-12000 only]
• (2) Quick Connect PID Fittings
[BG-12000 only]
• PID Batteries & Instructions
[BG-12000 only]
• Owners Manual
• Pre-rinse Flush Instruction Card
• Warranty / Extended Warranty Product
Card
• Filter Recycle Instruction Card
• Warranty Service Card
• Product Performance Data Sheet (PDS)
• California Certification Sheet
• Specification Sheet
GETTING STARTED
Typical Installation Example
Drinking Water Faucet
(Not Included)
Riser Adapter
Ball Valve
(Optional)
Performance
Indicator Device
(PID)
[BG-12000 only]
Filter Head/Shroud
Filter Cartridge
Water Filter Replacement
Indicator Device
Faucet Adapter
Filter
Vent Tube
1/4” Plastic Tubing
1/4” Plastic
Tubing
— 3 —
Tools Required (not included):
• Drill (Cordless recommended)
• Adjustable wrench
• Phillips head screwdriver
• Razor knife or tube cutter
Additional Parts Required (not included):
• Drinking Water Faucet