Water Inc 72” Signature Series - Manual (Page 26)

Loading Product
IMPORTANT NOTE: Before storing perishables,
allow unit to run for a minimum of 24 hours to al-
low temperature stabilization after start-up.
When loading items into unit, do no block internal
louvers and fan guard openings or performance will
be decreased.
Temperature Control Panel
The controller is located inside of the unit. The
display will read OFF when unit off and will show
temperature when unit is on.
IMPORTANT NOTE: the led display is reading
actual air temperature not product temperature.
Under these conditions, an air temperature swing
does not change the actual product temperature.
Product temperature remains at a very stable
temperature.
Freezer: 10° swing
Refrigerator 6° swing
Beverage Center 6° swing
Beer Dispenser 6° swing
Wine Reserve 4° swing
72” Signature Series
The 72” Signature Series comes equipped with a
state of the art refrigeration system. The compressor
is of a variable speed variety, which automatically
changes speeds based on system conditions and
load. The cabinet is equipped with two adjustable
digital temperature controllers and LED displays.
IMPORTANT NOTE: Always allow cabinet to run
for a minimum of 24 hours to allow temperature
stabilization after start-up before storing perish-
able items.
IMPORTANT NOTE: Perlck’s multi-zone units are
not recommended for outdoor applications.
This cabinet is a frost-free model meaning the evap-
orator (cooling coil) automatically defrosts on de-
mand at predetermined intervals. The controller also
has a manual defrost soft button on the front panel
signified by a melting snowflake. If depressed it will
automatically put the system into a defrost cycle.
Interior Light
The 72” unit has three interior lights that are illu-
minated when the corresponding door is opened.
The unit also comes standard with manual light
switches located next to each light for displaying
your products through a glass door. If manual light
switch is left on for an extended period of time it
may increase the cabinet temperature, especially in
close proximity to the light at the top and cause the
refrigeration system to run longer.
Loading Product
IMPORTANT NOTE: Before storing perishables,
allow unit to run for a minimum of 24 hours to al-
low temperature stabilization after start-up.
When loading items into unit, do no block internal
louvers and fan guard openings or performance will
be decreased.
Temperature Control Panel
The controller is located inside of the unit. The
display will read OFF when unit off and will show
temperature when unit is on.
IMPORTANT NOTE: the led display is reading
actual air temperature not product temperature.
Under these conditions, an air temperature swing
does not change the actual product temperature.
Product temperature remains at a very stable
temperature.
Freezer: 10°swing
Refrigerator 6° swing
Beverage Center 6° swing
Beer Dispenser 6° swing
Wine Reserve 4° swing
26 © 2011 24”, 48” & 72” Cabinet Installation / Operation Manual Document No. Z2305