ArtDio IPF-2000 - Manual (Page 15)

IPF-2000 User Manual
15
5.7 Save Settings
After all the configuration is done and correct, press REDIAL/MUTE several times until the LCD
shows【save settings】
Æ Press ENTER Æ LCD shows【Are You Sure?】.
• Press
ENTER as Yes, IPF-2000 will reboot and load the new settings.
• Press
REDIAL/MUTE as No, IPF-2000 will back to phone keypad configuration mode.
5.8 Exit Settings
If you want to exit the keypad configure mode without saving any changes, press
REDIAL/MUTE several times until the LCD shows【Are You Sure?】.
• Press
ENTER as Yes, IPF-2000 will reboot.
• Press
REDIAL/MUTE as No, IPF-2000 will back to phone keypad configuration mode.