ArtDio IPF-2000 - Manual (Page 21)

IPF-2000 User Manual
21
Dial Number
With “Dialnum” selected from Use Dialplan drop down list, please enter
the prefix in this field according to requirement of log in server.
DDD Code
With “Enable” is selected from Use Dialplan drop down list, set area code
according to E.164 dial rule. For example, LA 626.
IDD Code
With “Enable” is selected from Use Dialplan drop down list, set country
code according to E.164 dial rule. For example, U.S.A. 1; Taiwan 886.
IDD Prefix
With “Enable” is selected from Use Dialplan drop down list, set
international call prefix according to E.164 dial rule. For example,
U.S.A. 011; Taiwan 002.
DDD Prefix
With “Enable” is selected from the drop down list, set long distance call
prefix according to E.164 dial rule. For example, U.S.A. 1; Taiwan 0.
Forward Number Enter receiving forwarded calls phone number into this field.
Fwd noanswer
Forward calls without replying. Please enter receiving forwarded calls
phone number into fwd number field, and enter the ring period in the
answer field.
Fwd Always
Forward all calls. Please enter receiving forwarded calls phone number
into Forward Number field.
Fwd Busy
Forward calls if busy. Please enter receiving forwarded calls phone
number into Forward Number field, and enter the ring period in the
Answer field.
Answer
Enter a number from 0 through 60 to set the entries of the seconds
before the phone answer the call auto or forward the call. To disable
auto answer function, please set this parameter as 0.
Call Waiting
Enable the call waiting function. If you receive an incoming phone call
when in call, the incoming call information will show on the LCD screen.
Please press SPD/HOLD key to pick up another phone call, and press
SPD/HOLD key to switch back.
6.4 Audio Settings
Audio Settings
Fields Description
VAD Enable VAD (Voice Activity Detection) by checking this box.
AGC Enable AGC (Automatic Gain Control) by checking this box.
AEC Enable AEC (Acoustic echo canceller) by checking this box.
Codec 1~5
Set audio type by selecting options from the drop down list. The
options are G.711u, G.711a, G.723.1, G.729, G.729 and GSM.