LG MV12AH - Manual (Page 12)

Operating Instructions
12 Multi Type Air Conditioner
ON
Cooling Healthy
Dehumidification
Auto Heating
(Heat pump model only)
To lower the temperature
To raise the temperature
(Cooling Only
model)
(Heat Pump
model)
Press the Start/Stop button.
The unit will respond with beep
sound.
Open the door on the Remote Controller. To select Auto Op-
eration, press the Operation Mode Selection button.
Each time the button is pressed, the operation mode is
shifted in the direction of the arrow.
The temperature and fan speed are automatically set by the
electronic controls based on the actual room temperature.
If you want to change the set temperature, press the Room Tem-
perature Setting buttons. The set temperature will be changed
considering room temperature.
DURING AUTO OPERATION:
o You cannot switch the indoor fan speed. It has already been set by the Fuzzy rule.
o If the system is not operating as desired, manually switch to another mode. The system will not automatically
switch from the cooling mode to the heating mode, or from heating to cooling, then you must set the mode
and the desired temperature again.
o During Auto Operation, pressing the chaos swing button makes the horizontal louvers swing up and down
automatically. If you want to stop auto-swing, press the chaos swing button again.
Auto Operation
1
2
3