Owner's manual 23, Operating instructions, English – LG MT12AH User Manual

Page 23

Advertising
background image

Operation unit

Humidify

JET

AUTO

Program set

Room Temp

MED
LO

Heater
Defrost
Filter

Preheat

Out door

Time

Timer

On
Set no. Time

Off

01

03

05

07

09

11

13

15

17

19

21

23

ZONE

1 2 3 4

AUTO SWING

OPERATION

FAN SPEED

SUB FUNCTION

SET TEMP

HI

Plasma

Forced operation

(Tact switch)

Forced operation

(Tact switch)

Timer

Cancel

2ndF

Program

Week

Hour

Min

Holiday

Set/Clr

RESET

Plasma

Owner's Manual 23

Forced Operation

Auto Restart Function

Tips for Filter sign LED

PLASMA Purification Operation (Optional)

Operation procedures when the remote control can't be used.
Press the tact switch (Forced operation) for 2 seconds.
If you want to stop operation, press again the tact switch.
In case the power comes on again after power failure on the Forced
Operation mode, the operating conditions are automatically set as
follows:
During Forced Operation, the initial mode continues.

In case the power comes on again after a power failure, Auto Restarting Operation is the function to operate
procedures automatically to the previous operating conditions.

Filter sign lamp (LED) is ON.

If LED indicating filter sign lamp is ON, clean the filter.

After cleaning the filter, press the Timer button and

◀ button of wired remote controller at the same time for 3 sec.

Then filter sign LED is OFF.

Heat pump Model

Cooling Model

Room Temp. ≥ set Temp.-2°C Room Temp. < set Temp.-2°C

Operating mode

Cooling

Cooling

Heating

Indoor FAN Speed

High

set available

set available

Setting Temperature

22°C

set available

set available

1

Press the On/Off button. The unit will
respond with a beep.

2

Open the door on the remote control. Press the
PLASMA air purifying operation ON/OFF button.
Operation will start when the button is pressed and
stop when the button is pressed again.

3

Set the fan speed again with door of the remote
control closed. You can select the fan speed in four
steps-low, medium, high or Auto.
Each time the button is pressed, the fan speed
mode is shifted.

g Air purifying operation (PLASMA) with cooling, heating

or any other operations.

1

2

3

Operating Instructions

ENGLISH

Advertising
This manual is related to the following products: