Operations, Starting, Before setting the temperature – LG GRD7514NS User Manual

Page 14: Door alarm, Self test, Controls for refrigerator compartment, Lamp auto off feature

Advertising
background image

OPERATIONS

STARTING

When your refrigerator is first installed, allow it 2-3 hours to stabilize at normal operating temperatures

prior to filling it with fresh or frozen foods.
If operation is interrupted, wait 5 minutes before restarting.

BEFORE SETTING THE TEMPERATURE

The temperature of the refrigerator is kept constant regardless of changes in room temperature.

It is recommended that, once set, the temperature settings(the controls for the refrigerator and

freezer compartments) not be changed unless necessary.

This refrigerator has one temperature control button for the refrigerator compartment and one

temperature control dial for the freezer compartment.

The default setting of the temperature control button for the refrigerator compartment is ‘3°C’.

The default setting of the temperature control dial for the freezer compartment is ' '.

This refrigerator has a temperature sensor in the refrigerator compartment. It will start and stop

the compressor automatically as needed.

DOOR ALARM

When the door of the refrigerator or the freezer is open for 1 minute, an alarm will sound three times

.

It the door remains open, the alarm will repeat every 30 seconds.

SELF TEST

Your refrigerator contains a built in diagnostic capability. If it develops a malfunction in certain areas,

it will display an error code to assist the repair technician. While an error code is displayed, other

control and display functions will not operate.

If an error code is displayed, contact a service center. Do not disconnect the power cord from

the outlet.

FOR INTERNAL CONTROLLER MODEL

cooling.(MIN = warmest, MAX = coldest temperature)

CONTROLS FOR REFRIGERATOR COMPARTMENT

The default setting of the temperature control button for

the refrigerator compartment is NORMAL.
To control the refrigerator temperature, press the REF.

TEMP CONTROL button.
Whenever pressing the button, LED emitting the light.

The temperature is set in 7 steps, from MIN to MAX.

REF. TEMP. CONTROL

Ref. Temp Control Button

LAMP AUTO OFF FEATURE

When the door is open for 7 minutes or longer, the lamp inside goes off automatically to save energy

and prevent overheating. However, the alarm sound continues until the door is closed.

14

3

Advertising