LG PA77U - Manual (Page 30)

30 USING THE PROJECTOR
HDTV Reception
1
Connect an RF cable to the
connector port on the bottom of the
antenna. If the cable is not long
enough, you can use a coaxial cable.
2
Connect the other end of the cable
to the ANTENNA IN port of the
projector.
3
Attach the antenna to a wall near a
window temporarily and use the Auto
Tuning function of the projector to
tune channels.
CHANNEL
y Auto Tuning
y Manual Tuning
y Ch.Edit
4
Install the antenna in a place with
the best reception using the signal
strength indicator.
Antenna Installation
1
When attaching the antenna to a
window, clean the window with a dry
cloth first. You may also hang the
antenna on a wall with a hook or ring.
2
Remove the tape from the backside
of the Velcro ® tape and attach the
tape while trying not to touch the
sticky side with your fingers.
3
Check if the tape is securely fixed
after 10 minutes and attach the
antenna.