Setup, On screen display(osd) selection and adjustment – LG W2361V-PF User Manual
Restore all factory default settings except
Press the , buttons to reset immediately.
On Screen Display(OSD) Selection and Adjustment
If this does not improve the screen image, restore the factory default settings.
If necessary, perform the white balance function again. This function will be enabled only when
the input signal is an analog signal.
To choose the language in which the
control names are displayed.
To adjust position of the OSD window
on the screen.
If the output of the video card is different
the required specifications, the color
level may deteriorate due to video
signal distortion. Using this function, the
signal level is adjusted to fit into the
standard output level of the video card
in order to provide the optimal image.
Activate this function when white and
black colors are present in the screen.
(only for DSUB input)
To select the range of output image for
DTV timing in HDMI input.
(only for HDMI input)
Recommend overscan function to turn
on when connect AV equipment.
If you set ON, you enable the Response
Time Control function.
If you set OFF, you disable the
Response Time Control function.
MENU : Exit
SET : Select another sub-menu
Use this function to set the power
indicator on the front side of the monitor
to ON or OFF.
If you set OFF, it will go off.
If you set ON at any time, the power
indicator will automatically be turned on.