Cycle setting buttons – LG DLGX4071V User Manual

Page 34

Advertising
background image

34

how to UsE

how to UsE

Cycle setting buttons

SENSOR DRY cycles have preset settings that are selected

automatically. MANUAL DRY cycles have default settings, but you

may also customize the settings using the cycle setting buttons.

Press the button for that option to view and select other settings.

To protect your garments, not every dryness level, temperature,

or option is available with every cycle. See the Cycle Guide for

details.

dry level

Selects the level of dryness for the cycle. Press the DRY LEVEL

button repeatedly to scroll through available settings.
• This option is only available with SENSOR DRY cycles.
• The dryer will automatically adjust the cycle time. Selecting

MORE DRY or VERY DRY will increase the cycle time, while LESS

DRY or DAMP DRY will decrease the cycle time.

• Use a LESS DRY or DAMP DRY setting for items that you wish to

iron.

temp. control

Adjusts the temperature setting from ULTRA LOW to HIGH. This
allows precise care of your fabrics and garments. Press the TEMP.
CONTROL button repeatedly to scroll through available settings.

tIme dry

Allows you to manually select the drying time, from 20 to 60

minutes, in 10-minute increments. Use this for small loads or to

remove wrinkles. Use the MORE TIME/LESS TIME buttons to add or

reduce the drying time in 1-minute increments.

Your dryer features several additional cycle options to customize

cycles to meet your individual needs. Certain option buttons also

feature a special function (see the following page for details) that

can be activated by pressing and holding that option button for 3

seconds.

to add cycle options to a cycle:

1. Turn on the dryer and turn the cycle selector knob to select the

desired cycle.

2. Use the cycle settings buttons to adjust the settings for that

cycle.

3. Press the cycle option button(s) for the option you would like to

add. A confirmation message will be shown in the display.

4. Press the START/PAUSE button to start the cycle. The dryer will

start automatically.

WrInkle care

Selecting this option will tumble the load periodically for up to

3 hours after the selected cycle, or until the door is opened. This

is helpful in preventing wrinkles when you are unable to remove

items from the dryer immediately.

sIgnal on/off

To turn the SIGNAL off, press the SIGNAL ON/OFF button. Press

again to turn the SIGNAL back on.

notE

MFL62512888_en_120828.indd 34

2012.8.28 3:20:51 PM

Advertising
This manual is related to the following products: