LG 42LC4D - Manual (Page 88)

APPENDIX
86
APPENDIX
1 10 0.. T Tiinntt ((C Co om mm maannd d:: kk jj ))
To adjust the screen tint.
You can also adjust tint in the Video menu.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
Data Red : 0 ~ Green : 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’. G G p. 85.
Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x]
1 11 1.. SShhaarrp pnneessss ((C Co om mm maannd d:: kk kk ))
To adjust the screen sharpness.
You can also adjust sharpness in the Video menu.
Transmission [k][k][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’. G G p. 85.
Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]
1 12 2.. O OSSD D SSeelleecctt ((C Co om mm maannd d:: kk ll ))
To select OSD (On Screen Display) on/off.
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 0: OSD off Data 1: OSD on
Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x]
1 13 3.. R Reem mo ottee C Co onnttrro oll LLo occkk M Mo od dee ((C Co om mm maannd d:: kk m m ))
To lock the remote control and the front panel controls
on the set.
Transmission [k][m][ ][Set ID][ ][Data][Cr]
Data 0: Lock off Data 1: Lock on
Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]
If you’re not using the remote control and front panel
controls on the TV, use this mode. When main power is
on/off, remote control lock is released.
1 1 4 4 .. T Trreeb bllee ((C Co om mm maannd d:: kk rr ))
To adjust treble.
You can also adjust treble in the Audio menu.
Transmission [k][r][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’. G G p. 85.
Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]
1 1 5 5 .. B Baassss ((C Co om mm maannd d:: kk ss ))
To adjust bass.
You can also adjust bass in the Audio menu.
Transmission [k][s][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’. G G p. 85.
Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]
1 16 6.. B Baallaannccee ((C Co om mm maannd d:: kk tt ))
To adjust balance.
You can also adjust balance in the Audio menu.
Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’. G G p. 85.
Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]
1 17 7.. C Co ollo orr T Teem mp peerraattuurree ((C Co om mm maannd d:: kk uu ))
To adjust color temperature.
You can also adjust color temperature in the Video
menu.
Transmission [k][u][ ][Set ID][ ][Data][Cr]
Data 0: Medium 1: Cool 2: Warm 3: User
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
1 18 8.. C Chhaannnneell T Tuunniinngg ((C Co om mm maannd d:: m m aa))
To tune channel to following physical/major/minor number.
Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1]
[ ][Data2][ ][Data3][ ][Data4][ ][Data5][Cr]
Digital channels have a Physical, Major, and Minor channel
number. The Physical number is the actual digital channel
number, the Major is the number that the channel should
be mapped to, and the Minor is the sub-channel. Since
the ATSC tuner automatically maps the channel to the
Major number, the Physical number is not required when
sending a command.
Data 0: Physical Channel Number
NTSC air: 02~45, NTSC cable: 01, 0E~7D
ATSC air: 01~45, ATSC cable: 01~87
Data1 & 2: Major Channel Number
Data1: High byte Data2: Low byte
Two bytes are available for the Major and Minor, nor-
mally only the second byte is used.
Data3 & 4: Minor Channel Number
Not needed for NTSC.