LG LFC20770SB - Manual (Page 19)

18
USING YOUR REFRIGERATOR USING YOUR REFRIGERATOR
HUMIDITY CONTROLLED CRISPER
The crispers provide fresher tasting fruit and vegetables
by letting you easily control humidity inside the drawer.
You can control the amount of humidity in the moisture-
sealed crispers by adjusting the control to any setting
between HIGH and LOW.
•HIGH keeps moist air in the crisper for best storage of
fresh, leafy vegetables.
•LOW lets moist air out of the crisper for best storage
of fruit.
Removing and installing the humidity controlled crisper
1. To remove, pull the drawer out to full extension.
2. Lift the front of the crisper up, then pull it straight out.
3. To install, slightly tilt up the front, insert the drawer into
the frame and push it back into place.
Removing the glass
1. Lift up the glass under the crisper cover.
2. Pull the glass up and out.
NOTE: Pantry drawer not shown for clarity.
GLIDE ‘N’ SERVE
The Glide ‘N’ Serve provides storage space with a
variable temperature control that keeps the compartment
colder than the refrigerator temperature. This drawer can
be used for large party trays, deli items, or beverages.
NOTE: It is not recommended that this drawer be used
for fruits and vegetables.
Glide ‘N’ Serve Control
The control regulates the air temperature in the drawer.
Set the control level to COLD to provide normal
refrigerator temperature. Use the COLDER setting for
meats or other deli items.
NOTE: Cold air directed to the Glide ‘N’ Serve can
decrease the refrigerator temperature. It may be
necessary to adjust the refrigerator temperature.
To remove and replace Glide ‘N’ Serve
1. To remove, pull the drawer out to full extension.
2. Lift the front of the crisper up, then pull it straight out.
3. To install, slightly tilt up the front, insert the drawer into
the frame and push it back into place.
I I
I
I
I I
I