How to turn the hom-bot power supply on & off – LG LRV5900 User Manual

Page 17

Advertising
background image

14

HOW TO TURN THE HOM-BOT POWER SUPPLY ON & OFF

To turn the power supply on, turn the HOM-BOT upside down

on a smooth/soft surface and check whether the main power

supply switch is turned on.
If the main power supply switch is turned off, turn on the

switch.
※ When turning on the power switch, do not press the button

located at the upper section of the HOM-BOT. Operation of

the button can be delayed.

※ Turn off the power switch if the HOM-BOT will not be used

for a long period of time, in order to protect the battery.

※ The power switch cover is used for protecting the switch

from the dust. Always keep the cover attached.

When the HOM-BOT is not at the Home Station, and is in

the Stand by mode, press the ‘START/STOP’ button for

more than 1 second. The HOM-BOT will be turned on and

a melody will be sounded.
※ If the power is turned on while the HOM-BOT is not at

the Home Station, and nothing is done for ten minutes,

the unit will turn off and enter Standby mode to reduce

battery consumption.

Press the START/STOP button for two seconds while the

HOM-BOT is turned on. A melody will sound when the

power is turned off.

Turning on the main power supply

Turning on from Stand By mode.

Turning off the unit

• The power can be turned off due to the static electricity during

the operation.

- If the power is turned off, turn off the main power switch and

then turn it back on.

• If the power cannot be turned on, do the following.
- Turn on the power switch and wait for more than 3 seconds.
- Press the ‘START/STOP’ button when the power switch is

turned on.

- If the power is not turned on or if there is no display but only

the “Ting” sound, put the HOM-BOT on the home station.

- If there is no change even when HOM-BOT is attached to the

home station, press the reset switch located on the rear side
of the home station while the HOM-BOT is attached on the
home station.

Tip

Advertising