LG LSC27921TT - Manual (Page 14)

15
LIGHT/FILTER
The LIGHT/FILTER button controls the lamp in the
dispenser, resets the water filter replacement indicator
when the filter has been replaced.
The water filter needs replacement once wvery six
months. Filter month indicator becomes “0” to let you
know when replace filter.
Press and hold the LIGHT/FILTER button for more
than 3 seconds to reset the filter month indicator to six
after the water filter has been replaced.
ALARM/LOCK
Press this button to control the door-open alarm. Press
and hold the ALARM/LOCK button for 3 seconds to
lock the dispenser and all the other control panel
functions. Press and hold again for 3 seconds to
unlock. The ALARM/LOCK button also controls the
door alarm that sounds three times in 30 seconds
intervals when a compartment door is left open for
more than 60 seconds. The alarm stop sounding when
the door is closed. Press the ALARM/LOCK button
once to activate or deactivate the door alarm function.
DISPLAY OFF MODE
To activated Display Off Mode press and hold ICE PLUS
and FREEZER key over 5 seconds until lights will turn
on and after 20 seconds of inactivity the lights will turn
off automatically. To exit Display Off Mode press and
hold ICE PLUS and FREEZER key over 5 seconds until
lights will tilt. Display Off Mode doesn not affect the
temperature control settings of the unit.
Ice type indicator
Shows the type of ice,
crushed or cube, or water
that the dispenser will
dispense.
Freezer temperature
control
Shows the temperature in
the freezer, Celsius or
Fahrenheit.
Refrigerator temperature
Shows the temperature in
the refrigerator, Celsius or
Fahrenheit.
Ice Plus
When this button is on
the screen will show this
has been activated.
Dispenser light
When this button is in function on the light will show
this has been activated. When the dispenser light is
on the display will indicate this feature.
Door alarm indicator
This indicator shows that the door-open warning
alarm is activated.
Water filter status
This light shows the filter’s status. See the filter’s
configurations.
Lock status
This light shows the actual status of the control
panel, in which the lock function is on.
DIAGNOSIS FUNCTION (FAILURE DETECTION)
Diagnosis function automatically detects failure during
the normal use of refrigerator.
If you refrigerator fails, do not turn off the power.
Instead, contact a local Authorized service center or call
our support line for assistance. Turning off the
appliance will make it more difficult for the service
technician to determine the problem.
USING YOUR REFRIGERATOR