LG LFC25770ST - Manual (Page 7)

WARNING
7
1. When connecting the power
The dedicated outlet should be used.
• Using several devices at one outlet may cause fire.
• The electric leakage breaker
may damage food and the
dispenser may be leaked.
Do not extend or modify the length
of the power plug.
It causes electric shock or fire by the
electric damage of the power cord or
others.
Do not pull out the cord or touch
the power plug with wet hands.
It may cause electric shock or injury.
Unplug the power cord from the power outlet for
cleaning or other requirements.
It may cause electric shock or injury.
Do not allow the power plug to face upward or to be
squeezed at the back of the
refrigerator.
Water may be flown into or the plug
may be damaged, which causes fire
or electric shock.
Unplug the power plug when cleaning, handling or
replacing the interior lamp of the refrigerator.
• It may cause electric shock or injury.
• When replacing the interior lamp of
the refrigerator, make sure that the
rubber ring for preventing the
electric spark within the socket is
not taken off.
Remove water or dust from the power plug and insert
it with the ends of the pins
securely connected.
Dust, water or unstable
connection may fire or electric
shock.
Pull out the power plug not by grasping
the cord but the plug of its end.
It may cause electric shock or short circuit
to fire.
To reduce the risk of fire, electric shock, or injury to persons when using your product, basic safety
precautions should be followed, including the following. Read all instructions before using this appliance.
Prevent the power cord from being squeezed or
imprinted if the refrigerator is pushed in after the
power plug is extracted during the installation.
When moving your appliance away from the wall, be
careful not to roll over the power cord or to damage it
in any way. Do not crush or damage the water line.
It becomes the cause of fire or electric shock.
Do not allow the power cord bent or pressed by the
heavy object to be damaged.
It may damage the power cord to
cause fire or electric shock.
Make sure of grounding.
Consult a qualified electrician or service person if the
grounding instructions are not
completely understood, or if
you have doubts on whether
the appliance is properly
grounded.
The incorrect grounding may
cause breakdown and electric
shock.
Be sure to use grounded exclusive proper voltage
consent for the power plug.
Be sure to use grounded extension consents when
extension consents are used.
It becomes the cause of fire.
Grounding
Conductor
Copper
flat
More than
75cm