Cycle setting buttons, Special functions – LG LSDG389VS User Manual

Page 34

Advertising
background image

CYCLE SETTING BUTTONS

(cont.)

SPECIAL FUNCTIONS

The option buttons also activate special

functions, including CHILD LOCK, DRUM LIGHT,

ENERGY UASGE DISPLAY and LANGUAGE.

Press and hold the option button marked with the

special function for 3 seconds to activate.

1

Make sure it is seated evenly on the edge

of the inner door rim and resting flat on the

inside of the dryer.
NOTE: Be sure to remove the drying rack

after using the RACK DRY cycle.

2

To Install the Drying Rack

With the dryer door open, slide the rack into

the dryer drum.

*

DRUM LIGHT

Use DRUM LIGHT with item you can

see the drum inside by choosing drum

light function. It helps easy viewing

the drying cycle. Press and hold the

EASY IRON button for 3 seconds to activate or

deactivate the DRUM LIGHT function.

*

CHILD LOCk

Use this option to prevent

unwanted use of the dryer

or to keep cycle settings from

being changed while the dryer

is operating. Press and hold the RACK DRY

button for 3 seconds to activate or deactivate the

CHILD LOCK function.

The child lock indicator will be shown in the display,

and all buttons are disabled except the ON/OFF

button.
NOTE: CHILD LOCK lasts after the end of cycle.

If you want to deactivate this function,

press and hold the RACK DRY button

for 3 seconds.

*

ENERGY USAGE DISPLAY

This option provides the electric

energy and operating cost for the

cycle you selected on the LCD display.

The electric charge is converted at

Energy Star’s rate. This is a default option. To

turn off this option, press and hold the WRINKLE

CARE button for 3 seconds. (Estimated operating

cost based on a 2007 national average electricity

cost of 10.65 cents per kWh and natural gas cost

of $1.218 per therm.)
NOTE: Your cost will depend on your utility rates

and use. And the electric energy and operating

cost display the default of a cycle.

*

LANGUAGE

You may change the language shown

in the display from English to French

or Spanish. Press and hold the DAMP

DRY BEEP button for 3 seconds until

the display changes. Then select the desired

language by pressing the DAMP DRY BEEP

button.

Once set, the selected language will remain

in memory, even if the Dryer is turned off or

unplugged.

34

Advertising