LG 24EB23PM-B - Manual (Page 7)

7
ENG
ENGLISH
ASSEMBLING AND PREPARING
Adjusting the angle
1 Place the monitor mounted on the stand base
in an upright position.
2 Adjust the angle of the screen. The angle of
the screen can be adjusted up to 5° forwards
and 20° backwards for a comfortable viewing
experience.
y y To avoid injury to the fingers when adjusting
the screen, do not hold the lower part of the
monitor's frame as illustrated below.
y y Be careful not to touch or press the screen
area when adjusting the angle of the monitor.
WARNING
Mounting on a table
1 Lift the monitor and place it on the table in an
upright position.
Install at least
10 cm away from the wall to
ensure sufficient ventilation.
2
3 Press the (Power) button on the front of the
monitor to turn on the monitor.
10 cm
10 cm
10 cm
10 cm
y y Unplug the power cord prior to moving or
installing the monitor. There is risk of electric
shock.
CAUTION
Front Side Rear Side
1
2
Connect the Power cord to the monitor, then
plug the power cord into the wall outlet.
(Before connect please check the “ON/OFF”
knob in “O” state).
Press the “ON/OFF” knob in “ ” state
(Open the power).