Assembling the left refrigerator door – LG LFX28968SW User Manual

Page 15

Advertising
background image

15

INSTALLATION

ENGLISH

1

Lower the door onto the middle hinge pin.

2

Fit the top hinge (7) over the hinge lever

latch (8) and into place.

3

Rotate the lever (6) clockwise to secure

the hinge.

4

Install the grounding screws (5) and

connect the two wire harnesses (4).

5

Push the water tube (3) located at the top

of the left door into the hole beside the left
hinge on the top of the cabinet until it exits
through the back.

6

Insert the water supply tube (3) into the

connector until you see only one scale
mark. Fully insert the tub cover (15 mm).

7

Hook the tabs on the left side of the hinge

cover (1) under the edge of the top hinge (7)
and position the cover in place.

8

Insert and tighten the cover screw (1).

Assembling the Left Refrigerator

Door

Install the left refrigerator door after the right
door is installed.

(2)

(1)

(3)

(4)

(5)

(6)

(7)

(8)

NOTE

1) Gently press the Collet and insert the

tube until only one line shows on the
tube.

(Correct)

(Incorrect)

2) Pull the tube to make sure that the

tube is tightly fastened and then insert
the clip.

Collet

Tube

Insert Line

Clip

9

Insert the water supply tube at least 5/8 in.

(15 mm) into the connector.

10

Hook the tab on the door switch side

of the cover under the edge of the wire
opening in the cabinet top.

11

Position the cover into place. Insert and

tighten the cover screw.

Advertising
This manual is related to the following products: