AT&T E2116 - Manual (Page 15)

11
Telephone Operation
DIAL MODE: TONE
MESSAGE WAITING
CLEAR? YES
LANGUAGE
Cordless handset programming
Choose dial mode
The dial mode defaults to TONE. If you do not have
touch tone service, you’ll need to change the setting to
pulse by following these steps:
1. Press
MENU
to begin programming.
2. Press ^ or V until the screen displays DIAL
MODE : and the current setting.
3. Press
SELECT
to start changing current setting.
4. Press ^ or V to display TONE or PULSE.
5. Press
SELECT
to choose displayed dial mode and
exit.
Clear Voice Mail (for all cordless handsets)
If you subscribe to voice mail service provided by your
local telephone company, you will be alerted to new
voice mail messages in two ways. When you press
PHONE
, the dial tone will toggle on and off (stutter
tone) and you will receive a text message on the cord-
less handset. To manually remove the stutter tone and
MESSAGE WAITING
message on the cordless handset
screen:
• Press
MENU
.
• Press ^ or V until the screen displays
MESSAGE
WAITING
.
• Press
SELECT
then ^ or V to choose
YES
.
•
Press
SELECT
to select
YES
and exit.
NOTE: This only turns off the displayed message on the cordless handset
screen; it does not delete your voice mail message(s). Use this feature
when the phone indicates there is voice mail when you have none or you
have accessed your voice mail from a different phone line (while away from
home). If there actually is a new voice mail message, your local telephone
company will continue to send the message which turns the display mes-
sage back on.
Choose cordless handset display language
Your phone will default to English handset screen dis-
plays. If you wish to change them to Spanish, follow
these steps:
1. Press
MENU
to begin programming.
2. Press ^ or V until the screen displays
LANGUAGE .
3. Press
SELECT
to start changing current setting.
4. Press ^ or V to display ENGLISH or ESPANOL .
5. Press
SELECT
to choose displayed language and exit.