LG VX8100 - Manual (Page 14)

VX8100 13
Getting Started with Your Phone
The Battery
N NO OT TE E It is important to fully charge the battery before initial
use of the phone.
The phone comes with a rechargeable battery. Keep the
battery charged while not in use in order to maximize talk
and standby time. The battery charge level is shown at the
top of the LCD screen.
Installing the Battery
To install the battery, insert the bottom of the battery into
the opening on the back of the phone. Push the battery
down until the latch clicks.
Removing the Battery
Turn the power off. Pull the battery cover downward and
remove it. Then remove the battery by pressing the upper
area of it.
Charging the Battery
To use the charger provided with your phone:
Warning! Use only the charger provided with the phone.
Using any charger other than the one included with the
VX8100 may damage your phone or battery.
1. Plug the end of the AC adapter into the phone’s charger
port and the other end into an electrical outlet.
2. The charge time varies depending upon the battery
level. The maximum charge time for a fully discharged
standard battery is 3.5 hours.
Battery Charge Level
The battery charge level is shown at the top right of the
LCD screen. When the battery charge level becomes low,
the low battery sensor alerts you in three ways: Sounding
an audible tone, blinking the battery icon, and displaying
LOW BATTERY WARNING! If the battery charge level
becomes exceedingly low, the phone automatically
switches off and any function in progress is not saved.
Fully Discharged Fully Charged
VX8100_(E)_1.1_MOD.qxd 11/2/05 4:41 PM Page 13