LG VX8100 - Manual (Page 79)

78 VX8100
Using Phone Menus
0.1 Paired Devices
Pairing is the process that allows the handset to locate,
establish and register 1-to-1 connection with the target
device.
For pairing new Bluetooth device
1. Press [MENU], 2 times, , .
Set the desired device to pairing.
2. Follow the Bluetooth accessory instructions to set the
device to pairing mode.
3. Press Right Soft Key for New. Select Search New
and press .
4. If Bluetooth is set to off, you will be prompted to turn
power on. Select Yes and press .
5. The device will appear in the Found Devices menu
once it has been located. Highlight the device and
press .
6. The handset will prompt you for the passkey. Consult
the Bluetooth accessory instructions for the
appropriate passkey (typically “0000” - 4 zeroes). Enter
the passkey and press .
7. Once pairing is successful, select Yes and press
to connect with the device.
8. Once connected, you will see the device listed in the
Paired Devices menu and the Bluetooth connected
icon
will show up on your idle screen.
0.2 Power
Allows you to set the power On/Off.
1. Press [MENU], 2 times, , .
2. Use to select a setting, then press .
On / Off
N NO OT TE E By default, your device’s Bluetooth functionality is
turned off.
Phone does not support Bluetooth OBEX Profiles.
* For vehicle/accessory compatibility go to
www.verizonwireless.com/bluetoothchart
VX8100_(E)_1.1_MOD.qxd 11/2/05 4:42 PM Page 78