Control panel cycle options – LG LDS5540WW User Manual

Page 8

Advertising
background image

8

PARTS AND FEATURES

CONTROL PANEL

Cycle Options

Press the desired cycle and then select the options for that
cycle.

SANITARY

This high-temperature rinse sanitizes dishes and glassware in
accordance with NSF/ANSI Standard 184 for residential dish-
washers. Certified dishwashers are not intended for licensed
food establishments.

EXTRA DRY

Select the EXTRA DRY option for better drying performance.
This option adds 60 minutes of extra drying time to the cycle.

EXTRA RINSE

The Extra Rinse symbol indicates that an extra rinse has been
added to the cycle.

DELAY START

The Delay Start feature allows you to delay the start of a se-
lected cycle. Each time the Delay Start button is pressed, the
delay time will increase an hour. The delay start time can be
set from 1 to 19 hours, in one-hour increments.

CHILD LOCK

The Child Lock feature helps prevent your settings from be-
ing changed during a cycle. Selecting this feature locks all
of the buttons, except for the Power button, on the control
panel. This feature does not lock the door.

To activate the Child Lock:

1. Press the Power button.

2. Select the cycle (and desired options).
3. Press and hold the Extra Rinse and Delay Start buttons for

three seconds. The Child Lock indicator will illuminate in

the display once the Child Lock is activated.

DIGITAL DISPLAY

The Digital Display on the control panel shows the ESTIMAT-
ED cycle time. When the dishwasher is powered up, the dis-
play will be blank. When the cycle and options are selected,
the display will show the total estimated time to complete
those selections. During operation, the display shows the re-
maining estimated operating time.

• The estimated time shown in the display does not include

delay times for heating water, etc.

• If Delay Wash is selected, the display shows the delay time

in hours.

• Time may vary depending on the soil level of your load.
• The RINSE AID symbol

indicates that the rinse aid

needs to be refilled.

NOTE

POWER

y

Press the Power button to turn on the control panel. If no
cycle is selected within four minutes, the dishwasher will
power off.

y

After the cycle is complete, the power automatically turns
off for safety and to reduce energy consumption.”

y

If there is a power surge, power outage, or disruption of
any kind, the PF indicator will display and power will be au-
tomatically turned off for safety. The cycle will need to be
restarted.

SMART DIAGNOSIS

Should you experience any problems with your dishwasher,
it has the capability of transmitting data to your Smart Phone
using the LG Smart Laundry & DW Application or via you tele-
phone to the LG call center.

Smart Diagnosis is a troubleshooting feature designed to as-
sist, not replace, the traditional method of troubleshooting
through service calls. The effectiveness of this feature de-
pends upon various factors, including, but not limited to, the
reception of the cellular phone being used for transmission,
any external noise that may be present during the transmis-
sion, and the acoustics of the room where the machine is lo-
cated.  Accordingly, LG does not guarantee that Smart Diag-
nosis would accurately troubleshoot any given issue.

NOTE

Advertising
This manual is related to the following products: