LG WM4070HWA - Manual (Page 26)

26 USING YOUR WASHING MACHINE
Adjusts the melody and button tones,
SIGNAL
The washing machine plays a melody when the wash cycle
is finished. The buttons make a sound each time a button is
pressed. The melody and button tones can be changed and
off as desired.
1 Press A .
2 Turn
B
to the desired cycle.
3 Press
. Adjust the melody and button tones as
desired.
4 Press the desired option to use the other options.
5 Press C .
Prewashing, PRE-WASH
Pre-wash for 16 minutes when clothes are covered in dirt or
dust. This feature is suitable for heavily soiled items.
1 Press A and turn
B
to the desired cycle.
2 Press .
- light will turn on.
3 Press the desired option to use the other options.
- Skip to step 4 to use the default setting without
changing the options.
4 Press C .
Rinse, drain and spin only, RINSE+SPIN
Use this cycle to rinse detergent from load.
1 Press A and turn
B
to the desired cycle.
2 Press .
3 Press the desired option to use the other options.
- Skip to step 4 to use the default setting without
changing the options.
4 Press C .
Adding extra rinse cycle, EXTRA RINSE
You can add an extra rinse cycle to the default rinse cycle.
1 Press A and turn
B
to the desired cycle.
2 Press .
- light will turn on.
3 Press the desired option to use the other options.
- Skip to step 4 to use the default setting without
changing the options.
4 Press C .
Presetting the start time, DELAY WASH
You can set the desired start time.
1 Press A and turn
B
to the desired cycle.
2 Press the desired option to use the other options.
3 Press repeatedly to select the desired start time.
- light will turn on.
- The set start time appears on the display panel.
- Each press of the button increases the delay time by
one hour, up to 19 hours.
4 Press C .
Efficiency cleaning, STEAM
Adding the Steam option to these cycles provides superior
cleaning performance.
By using a hot steam fabrics get the cleaning benefits of
a super hot wash, without the energy usage or potential
damage to fabrics.
1 Press A and turn
B
to the desired cycle.
2 Press . The washer will automatically adjust the
cycle settings.
3 Set any other desired options.
4 Press C .
WARNING
y Do not touch the door during steam cycles. The door
surface can become very hot. Allow the door lock to
release before opening the door.
y Do not attempt to override the door lock mechanism
or reach into the washer during a steam cycle. Steam
can cause severe burns.