LG M198WX-WA - Manual (Page 26)

25
TIMER ID to adjust the time function
Adjusting the Screen
Clock
Off/On timer
Auto off
This function is used to set up of current time.
You must set the time correctly before using On/Off timer function.
1) Press the MENU button and then use button to select the Timer menu.
2) Press the button and then use button to select the Clock menu.
3) Press button and then use button to set the hour(01~12 AM/PM).
4) Press button and then use button to set the minutes(00~59).
The default value is -- : --.
5) Press the ENTER/MENU button to save.
The Off timer automatically switches the set to off mode at the pre-set time.
1) Press the MENU button and then use button to select the Timer menu.
2) Press the button and then use button to select Off timer or On timer.
3) Press the button and then use button to set the hour(01~12 AM/PM).
4) Press the button and then use button to set the minutes(00~59).
5) Press the button and then use button to select On or Off.
6) Only On timer function; Press the button and then button to adjust volume level
and programme number.
7) Press the ENTER/MENU button to save.
If Auto off is active and there is no input signal, the set switches to off mode
automatically after 10 minutes. ( It is not working in PC)
1) Press the MENU button and then use button to select the Auto off menu.
2) Press the button and then use button to select On or Off.
3) Press the ENTER/MENU button to save .
Timer
Clock
Off timer
On timer
Auto off
-- : -- AM
MENU
• In the event of power interruption (disconnection or power failure), the Clock must be reset.
• Two hours after the set is switched on by the On timer function it will automatically switch
back to off mode unless a button has been pressed.
• Once the On or Off timer is set, these functions operate daily at the preset time.
• Off timer function overrides On timer function if they are set to the same time.
• The set must be in off mode for the On timer to work.
• On timer will move on to auto off if no activity is received in 2hours after setting the On timer.
• If the monitor switches to sleep mode when using the PC, "Clock" menu dose not operate.
Note