H o w to u s e, Secondary functions, Custom program – LG WM2801HWA User Manual

Page 25

Advertising
background image

H O W TO U S E

SECONDARY FUNCTIONS

The special function buttons also activate

secondary functions, including CHILD LOCK,

DRUM LIGHT, and LANGUAGE. Press and hold

the button marked with the secondary function

for 3 seconds to activate.

CHILD LOCk

Use this option to prevent

unwanted use of the washer or

to keep cycle settings from being

changed while the washer is

operating. Press and hold the PRE WASH button

for 3 seconds to activate or deactivate CHILD

LOCK.
CHILD LOCK will be shown in the display, and all

controls are disabled. The washer can be locked

during a cycle.

DRUm LIgHT

The drum is equipped with a blue

LED light that illuminates when

the washer is turned on. This light

automatically turns off when the

door is closed and the cycle starts. To turn on

the light during a cycle, press and hold the TUB

CLEAN button for 3 seconds. The drum light will

illuminate and then turn off automatically after 4

minutes.

CUSTOm PROgRAm

CUSTOM PROGRAM allows you

to store a customized wash cycle

for future use. It allows you to

save favorite temperature, spin

speed, soil level, and other options for a cycle,

and then recall them at the touch of a button.

To store a Custom Program:

Select a cycle.

Adjust the Wash/Rinse Temperature, Spin

Speed, and Soil Level to the desired settings.

Set any other desired options.

Press and hold the CUSTOM PROGRAM

button for 3 seconds. You will hear two

beeps to confirm the settings have been

stored.

1

2

3
4

IMPORTANT: If you press and hold the CUSTOM

PROGRAM button for 3 seconds, you will

overwrite any previously stored CUSTOM

PROGRAM.

To recall a Custom Program:

Press and release the CUSTOM PROGRAM

button. The stored settings will be displayed.

Press and release the START/PAUSE button

to start the cycle. The washer will start

automatically.

1

2

TUB CLEAN

A buildup of detergent residue

can occur in the wash tub over

time and can lead to a mildewy

or musty smell. The TUB CLEAN

cycle is specially designed to remove this

buildup. The display will show a message to add

liquid bleach to the dispenser. Prewash option

will be selected. After the cycle has ended,

open the door and allow the drum interior to dry

completely.
Refer to Care and Cleaning of the Interiorfor

further information.
NOTE: Do NOT use this cycle with clothes,

and do NOT add detergent or fabric softener.
NOTE: If you use the TUB CLEAN cycle on a

monthly basis, the wash drum will be kept clean.

2

Advertising
This manual is related to the following products: