Telescopic rack, Caution – LG LWS3081ST User Manual

Page 14

Advertising
background image

14

Rack guides

TELESCOPIC RACK

The sliding shelf telescopic rack can be used in any
rack position.

Open Position

Closed and Engaged Position

Installing the Telescoping Rack

Step. 1
Start with the rack in the "Closed" position. Place one
hand in the front near the center, and place your other
hand near the right rear corner.

Step. 2
Carefully insert rack between the rack guides, to the
back of the oven until the shelf slides into place.

Removing Telescopic Rack

Step. 1
With the rack in the "Closed" position, grasp the front
of the rack and frame and lift up. Slowly push the rack
towards the back wall.

Step. 2
After pushing rack/ frame towards the back wall lift the
rear of the rack, and pull the entire rack and frame out
between the rack guides.

Step. 3
Once the rack is secured in the back, pull the entire
rack forward until the rack locks into place.
NOTE: Be sure that the rack is securely positioned
and level before use.

A. Telescopic rack

B. Frame

A. Telescopic rack

B. Frame

• DO NOT cover racks with aluminum foil.

- This will result in poor baking caused by

interrupted heat distribution.

• Always arrange oven racks when the oven

is cool.

• Do not place aluminum foil or any other

material on the oven bottom.

• Remove all racks including the telescoping

rack and frame when using a self clean
cycle.

CAUTION

A

B

A

B

Advertising