Altinex MT105-110 - Manual (Page 4)

MULTI-TASKER
4
4
ABOUT YOUR MT105-110/111 2
MT105-110/MT105-101
8/16-in 8-out Sync Matrix Switcher
Cards
The MT105-110/111 16-in/8-in, 8-out Sync Matrix
Switcher card is designed for use in the Multi-
Tasker

enclosure to allow the routing of computer
and broadcast video in audio/visual presentation
systems. When installed in the enclosure (MT100-
100), this card enables 16 composite video sources
to be connected and switched to eight different
display or recording devices. Inputs are selected via
easy-to-use ASCII commands from a control system
or computer connected to the RS-232 port of a
Multi-Tasker™ enclosure.
Multiple MT105-110/111 cards can be installed in
the enclosure to provide additional functionality. For
example, two cards can be used to handle the two
components of an RGBHV signal (HSync and
VSync. When using these cards to switch RGBHV
format signals, it is possible to adapt the 5 BNC
connectors to a VGA-type, 15-pin HD connector
using ALTINEX adapter cables, such as part #
MS8102CA
TECHNICAL SPECIFICATIONS 3
FEATURES/
DESCRIPTION
MT105-110/111
GENERAL
Inputs
8/16
External Input Connectors 8/16 BNC Female
Outputs 8
Output Connector 8 BNC Female
Compatibility
Using 1 Card
Composite Sync
Using 2 Cards H+V Sync
Table 1. MT105-110/111 General
MECHANICAL MT105-110/111
Enclosure Slots Required Three
Weight 1.0 lb (0.45 kg)
Connector Panel Black
T° Operating 10°C-50°C
T° Maximum 75°C
Humidity 90% non-condensing
MTBF (calc.) 40,000 hrs
Table 2. MT105-110/111 Mechanical
ELECTRICAL MT105-110/111
Input Signals
Impedance
10K Ohms
Analog/TTL 1.5 – 5V max.
Output Signals
Impedance
22 Ohms
Power
Power from
MT100-100
+6V -6V
Power
Consumption
MT105-110 450mA 380mA 5 watts
MT105-111 200mA 150mA 2.1 watts
Table 3. MT105-110/111 Electrical