Super energy saving settings – LG E2351T-BN User Manual
Page 15
15
ENG
ENGLISH
CUSTOMIZING SETTINGS
The available MENU settings are described below.
sUPeR eneRGY sAVInG settings
1
Press any button on the front of the Monitor set to
display the
MonItoR setUP OSD menu.
2
Press the
MenU button to display the options in the
OSD Menu.
3
Select
sUPeR eneRGY sAVInG by pressing the
▼ button.
4
Enter to
sUPeR eneRGY sAVInG by pressing the
► button.
5
Set the options by pressing ◄ or ► buttons.
6
Select
eXIt to leave the OSD menu.
To return to the upper menu or set other menu items,
use the up arrow ( ) button.
The available SUPER ENERGY SAVING settings are described below.
Menu
Description
on
Enables SUPER ENERGY SAVING.
oFF
Disables SUPER ENERGY SAVING.
Reset
Resets the values of total energy consumption reduction and CO2 emission reduction estimates.
y
totAL PoWeR ReDUCtIon: How much power is saved while using the monitor.
y
totAL Co2 ReDUCtIon: Estimated CO2 not used by activating the Super Energy Saving function.
y
sAVInG DAtA(W/h)
470 mm (18.5 inch) 508 mm (20 inch) 546 mm (21.5 inch) 584 mm (23 inch)
SUPER SAVING
3 W/h
3 W/h
4 W/h
5 W/h
LED SAVING
3 W/h
18 W/h
15 W/h
12 W/h
y
Saving Data depends on the Panel. So,those values should be different from each panel and panel
vendor.
y
LG calculated these values by using
“broadcast video signal”.
y
LED Saving means how much power can be saved using a WLED Panel instead of CCFL panel.
y
SUPER SAVING means how much power can be saved using the SUPER ENERGY SAVING
function.
note
EXIT
OK
ON
OFF
RESET
TOTAL POWER REDUCTION: 20 W
TOTAL CO2 REDUCTION:
16 g
SUPER
SAVING
: 5 W/h
LED SAVING
: 12 W/h
SUPER ENERGY SAVING