LG CF3D - Manual (Page 36)

Information
36
Regarding the projector lamp control
To obtain a replacement Lamp unit
Lamp unit disposal
• Don’t turn off the projector for at least in 5 minutes after activating it.
- The frequent On/Off changes may cause the lamp to deteriorate.
• Don’t pull out the power cord while the projector or the cooling fan are running.
- It may shorten the life of the lamp.
• The life-span of depends on the environment its used in and how well its treated.
• The projector uses a high pressure mercury lamp. Shock or abuse to the projector can cause the lamp to burst.
• Continuing to use a lamp the projector has indicated needs replacement may burst.
• If the lamp burst, perform the following:
- Remove the power cord immediately.
- Let some fresh air in immediately (Ventilation).
- Have a service center check the projector's condition and replace the lamp.
- Do not disassemble the projector.
Lamp model number is on page 38. Check the lamp model and then purchase it from an LG Electronics Service
Center. Using another manufacturers lamp may cause damage to the projector.
Dispose of the used lamp by returning it to the LG Electronics Service Center.
WARNING