LG DLGY1702V - Manual (Page 30)

30
HOW TO USE
Operating the Dryer
5VSO
0O
UIF
%SZFS
Press the POWER button to turn on the dryer. The cycle LEDs will illuminate
BOE
B
TJHOBM
XJMM
TPVOE

JG
UVSOFE
PO
3FGFS
UP
QBHF

3
#FHJO
UIF
DZDMF
Press the START/PAUSE button to begin the cycle. The cycle can be paused at
any time either by opening the door or by pressing the START/PAUSE button. If
UIF
DZDMF
JT
OPU
SFTUBSUFE
XJUIJO

NJOVUFT

UIF
ESZFS
XJMM
TIVU
PGG
BOE
UIF
DZDMF

settings will be lost.
5
4FMFDU
B
$ZDMF
Press the Cycle buttons until the indicator for the desired cycle is lit.
The preset temperature, dry level, and option settings for that cycle will be
shown. Default settings for the selected cycle can now be changed if desired.
Refer to the Cycle Setting and Options page for details.
4
&OE
PG
$ZDMF
When the cycle is finished, the chime will sound if it is set. Remove your
clothing from the dryer immediately to reduce wrinkling. If Wrinkle Care is
selected, the dryer will tumble briefly every few minutes to help prevent
wrinkles from setting in the clothes.
6
$MFBO
UIF
-JOU
'JMUFS
If the lint filter has not already been cleaned, lift out the filter and remove the
lint from the last load. This will help ensure the fastest and most efficient drying
performance.
1
-PBE
UIF
%SZFS
Load the dryer with the wet laundry from the washer. If the load is extra large,
you may need to divide it into smaller loads for proper performance and fabric
care.
2
Lint
Filter
NOTE
Not all options or modifiers are available on all cycles. Refer to the Cycle
Guide page for default settings and allowable options. A different chime will
sound and the LED will not come on if the selection is not allowed.
HOW TO USE