LG W2600H-PF - Manual (Page 7)

A6
Connecting the Display
Wall-outlet type
MAC
Power Cord
1 2
2.
Touch the power button on the front of panel to turn
the power on. When monitor power is turned on, the
'Self Image Setting Function' is executed
automatically. (Only Analog Mode)
NOTE
'Self Image Setting Function'? This function provides the user with optimal display settings.When the user
connects the monitor for the first time, this function automatically adjusts the display to optimal settings for
individual input signals.
'AUTO/SET Function'? When you encounter problems such as blurry screen, blurred letters, screen flicker
or tilted screen while using the device or after changing screen resolution, touch the AUTO/SET function button
to improve resolution.
PC
PC
Varies according to model.
Signal Cable
A
B
C
Connect D-sub Cable (PC)
Connect D-sub Cable (Mac)
Connect DVI-D Cable
DVI-D(This feature is not
available in all countries.)
Mac adapter
For Apple Macintosh use, a
separate plug adapter is
needed to change the 15 pin
high density (3 row) D-sub
VGA connector on the
supplied cable to a 15 pin 2
row connector.
Power button
Using the Computer
1.
Make sure to turn off the computer and product.
Connect signal input cable and power cord in order, then tighten the
screw of the signal cable.
1 2
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display
may differ from the view as shown.
User must use shielded signal interface cables (D-sub 15 pin
cable, DVI cable) with ferrite cores to maintain standard
compliance for the product.